1 - 25 of 48 results
Refine Your Search
Subject
- Object✖
- Armaments (2)
- Rifle (2)
- Doll (1)
- Fishing (3)
- Fish Trap (3)
- Lobster Trap (3)
- Furnishings (1)
- Desk (1)
- Musical (5)
- Stringed Instrument (5)
- Fiddle (5)
- Violin (5)
- Navigational Marker (1)
- Navigational Buoy (1)
- Other Object (32)
- Site Marker (2)
- Monument (2)
- Writing (1)
- Envelope (1)
- People (4)
Type
- Document (5)
- Image (24)
- Map (1)
- Publication (1)
- Reference (14)
- Set (2)
- Uncurated Accession (1)
Place
- none✖
Date
Tags
- object (11)
| Item | Title | Type | Subject | Creator | Publisher | Date | Place | Address | Description | |
|---|---|---|---|---|---|---|---|---|---|---|
| 10268 | Robert Smallidge Sr. and his Hand Made Gun |
|
| |||||||
| 3004 | Rebecca's Dolls |
|
| Carroll family mythology says that Rebecca Carroll made sixteen dolls for her grandchildren – one for each grandchild born while she was alive. Researchers have found evidence of three of the dolls and are looking for the others. | 
Description: Carroll family mythology says that Rebecca Carroll made sixteen dolls for her grandchildren – one for each grandchild born while she was alive. Researchers have found evidence of three of the dolls and are looking for the others. | |||||
| 15559 | J. J. OBrien and His Jesuit Settlement Memorial |
|
|
|
| |||||
| 15598 | John D. Rockefeller, Jr’s Memorial |
|
|
|
| |||||
| 16735 | Jacob William Carroll Letters |
|
| |||||||
| 12785 | Potter’s Patent Paper Picture-Card Frame |
|
| |||||||
| 14107 | Hinckley Hardware Photographs Produced by Willis Ballard |
|
| The Manset Boatyard, and later as the Henry R. Hinckley Company, made most of the hardware for their vessels in their own shop. Willis Ballard produced illustrations of their hardware the old fashioned way too. Working in the days before computer generated or touched up images, Ballard photographed hundreds of hardware pieces and then painstakingly isolated each item against a white background by hand, using a brush dipped in white paint. However imperfect the images seem in their original size, they were beautiful when the photographs were reduced to produce catalogue pages. Some of the hardware was used just on Hinckley boats and some was sold at the company’s Manset Marine Supply Company in the old Clark and Parker store building on Clark Point. The library has 60 Ballard negatives illustrating Hinckley hardware. "1940 - Henry [Henry R. Hinckley (1907-1980)] starts the Manset Marine Supply Company to distribute marine supplies, engines and equipment to the many small yards springing up along the coast, as well as to his own boatyards. Dissatisfied with the quality of some commercial fittings, Hinckley designs many fittings that are still used by the company today. Among these items are fuel tanks, stanchions, deck plates, bow and stern chocks, pulpits and lead keels." - “The Hinckley Company History,” The Hinckley Company web site, 2000, Accessed online 11/20/2010; http://www.hinckleyyachts.com/employment/about_us2.html | 
Description: The Manset Boatyard, and later as the Henry R. Hinckley Company, made most of the hardware for their vessels in their own shop. Willis Ballard produced illustrations of their hardware the old fashioned way too. Working in the days before computer generated or touched up images, Ballard photographed hundreds of hardware pieces and then painstakingly isolated each item against a white background by hand, using a brush dipped in white paint. However imperfect the images seem in their original size, they were beautiful when the photographs were reduced to produce catalogue pages. Some of the hardware was used just on Hinckley boats and some was sold at the company’s Manset Marine Supply Company in the old Clark and Parker store building on Clark Point. The library has 60 Ballard negatives illustrating Hinckley hardware. "1940 - Henry [Henry R. Hinckley (1907-1980)] starts the Manset Marine Supply Company to distribute marine supplies, engines and equipment to the many small yards springing up along the coast, as well as to his own boatyards. Dissatisfied with the quality of some commercial fittings, Hinckley designs many fittings that are still used by the company today. Among these items are fuel tanks, stanchions, deck plates, bow and stern chocks, pulpits and lead keels." - “The Hinckley Company History,” The Hinckley Company web site, 2000, Accessed online 11/20/2010; http://www.hinckleyyachts.com/employment/about_us2.html [show more] | |||||
| 14550 | Richardson Family Flintlock Musket |
|
| The gun was possibly used in the Battle of Norwood Cove. | 
Description: The gun was possibly used in the Battle of Norwood Cove. | |||||
| 3049 | Acetylene Beacon Traffic Control Tower |
|
| The traffic control tower at the junction of Main Street and Clark Point Road was an acetylene beacon made by the American Gas Accumulator Co. of Elizabeth, New Jersey | 
Description: The traffic control tower at the junction of Main Street and Clark Point Road was an acetylene beacon made by the American Gas Accumulator Co. of Elizabeth, New Jersey | |||||
| 13377 | Revenue Ensign - Flag of the United States Customs Service |
|
| The Custom's service flag was designed by Secretary of the Treasury Oliver Wolcott, Alexander Hamilton’s successor, who used 16 alternating red and white vertical stripes, one stripe for each State that had joined the Union by 1799, with a bald eagle in the canton holding 3 arrows in his sinister claw and an olive branch in his dexter claw. On the left and right sides of the eagle are 4 stars each in an arc pattern, and above the eagle 5 stars. On the eagle is a crest representing the United States. Wolcott submitted his flag design to President John Adams in 1799 and the final version was approved on August 1st, 1799. Nathaniel Hawthorne, who served as customs surveyor at the port of Salem, Massachusetts, from 1846 to 1849, suggested the "stripes turned vertically, not horizontally, indicated a civil, not military, post of Uncle Sam’s government." Although originally intended as a marine ensign to be flown from revenue cutters and customs vessels, the collectors soon were flying it over their customhouses. That tradition was codified a half-century later, when in 1874, Treasury Secretary William A. Richardson, required that during business hours, the customs ensign was to be hoisted by the side of the Stars and Stripes over all customhouses. From Wikipedia: The flag of the Customs Service was designed in 1799 by Secretary of the Treasury Oliver Wolcott, Jr. and consists of 16 vertical red and white stripes with a coat of arms depicted in blue on the white canton. The original design had the Customs Service seal that was an eagle with three arrows in his left talon, an olive branch in his right and surrounded by an arc of 13 stars. In 1951, this was changed to the eagle depicted on the Great Seal of the United States. Its actual name is the Revenue Ensign, as it was flown by ships of the Revenue Cutter Service, later the Coast Guard, and at customs houses. | 
Description: The Custom's service flag was designed by Secretary of the Treasury Oliver Wolcott, Alexander Hamilton’s successor, who used 16 alternating red and white vertical stripes, one stripe for each State that had joined the Union by 1799, with a bald eagle in the canton holding 3 arrows in his sinister claw and an olive branch in his dexter claw. On the left and right sides of the eagle are 4 stars each in an arc pattern, and above the eagle 5 stars. On the eagle is a crest representing the United States. Wolcott submitted his flag design to President John Adams in 1799 and the final version was approved on August 1st, 1799. Nathaniel Hawthorne, who served as customs surveyor at the port of Salem, Massachusetts, from 1846 to 1849, suggested the "stripes turned vertically, not horizontally, indicated a civil, not military, post of Uncle Sam’s government." Although originally intended as a marine ensign to be flown from revenue cutters and customs vessels, the collectors soon were flying it over their customhouses. That tradition was codified a half-century later, when in 1874, Treasury Secretary William A. Richardson, required that during business hours, the customs ensign was to be hoisted by the side of the Stars and Stripes over all customhouses. From Wikipedia: The flag of the Customs Service was designed in 1799 by Secretary of the Treasury Oliver Wolcott, Jr. and consists of 16 vertical red and white stripes with a coat of arms depicted in blue on the white canton. The original design had the Customs Service seal that was an eagle with three arrows in his left talon, an olive branch in his right and surrounded by an arc of 13 stars. In 1951, this was changed to the eagle depicted on the Great Seal of the United States. Its actual name is the Revenue Ensign, as it was flown by ships of the Revenue Cutter Service, later the Coast Guard, and at customs houses. [show more] | |||||
| 13442 | Hartford Marine Gas Engines |
|
| The Gray and Prior Machine Company in Hartford, Connecticut made “Hartford” marine engines. The company was organized in 1898 and incorporated in 1900 to make marine engines. It was the combined vision of Robert Watkinson Gray (1876-1945) and George A. Prior (1871-1938). George Prior had learned the machine trade at Pratt & Whitney in East Hartford, had worked for the Electric Vehicle Company and had been granted a patent for a universal joint. Robert Gray had worked for the Hartford Rubber Works and contributed $5,000 in capital. George Prior was an inventive genius and contributed much to the initial success of the company. He designed and built his own motorcycle in 1900, and completed his first automobile in 1904, both using the Gray and Prior 2-cylinder marine engine that he designed. He applied his vast experience in the machine shop to his inventions and designs, which have been the foundation of the success of the Gray and Prior Machine Company for almost a century. Gray and Prior originally made marine engines in addition to their growing line of universal joints and couplings. Their Hartford Marine engines were of very high quality and commanded respect in the market. They built two-stroke inboard engines and medium heavy-duty type long stroke four-cycle marine motors. Many of the ideas involved in their design were improvements over existing marine engines of the day. Gray and Prior continued to manufacture the engines for more than 25 years, until they sold the tooling and the designs for the Hartford Sturdy Twin to the Indian Motorcycle Company in Springfield, Massachusetts for $15,000. - Information adapted from “Our Company’s History,” The Gray and Prior Machine Company web site, Accessed online 04/13/2012; http://www.grayandprior.com/history.htm | 
Description: The Gray and Prior Machine Company in Hartford, Connecticut made “Hartford” marine engines. The company was organized in 1898 and incorporated in 1900 to make marine engines. It was the combined vision of Robert Watkinson Gray (1876-1945) and George A. Prior (1871-1938). George Prior had learned the machine trade at Pratt & Whitney in East Hartford, had worked for the Electric Vehicle Company and had been granted a patent for a universal joint. Robert Gray had worked for the Hartford Rubber Works and contributed $5,000 in capital. George Prior was an inventive genius and contributed much to the initial success of the company. He designed and built his own motorcycle in 1900, and completed his first automobile in 1904, both using the Gray and Prior 2-cylinder marine engine that he designed. He applied his vast experience in the machine shop to his inventions and designs, which have been the foundation of the success of the Gray and Prior Machine Company for almost a century. Gray and Prior originally made marine engines in addition to their growing line of universal joints and couplings. Their Hartford Marine engines were of very high quality and commanded respect in the market. They built two-stroke inboard engines and medium heavy-duty type long stroke four-cycle marine motors. Many of the ideas involved in their design were improvements over existing marine engines of the day. Gray and Prior continued to manufacture the engines for more than 25 years, until they sold the tooling and the designs for the Hartford Sturdy Twin to the Indian Motorcycle Company in Springfield, Massachusetts for $15,000. - Information adapted from “Our Company’s History,” The Gray and Prior Machine Company web site, Accessed online 04/13/2012; http://www.grayandprior.com/history.htm [show more] | |||||
| 14608 | Robert Smallidge's Hand Made Gun |
|
| |||||||
| 15577 | Horse Trough Memorial in Acadia National Park - a Mystery |
|
|
|
| |||||
| 10256 | Silver Inlay - Hand Made Gun |
|
|
| ||||||
| 10257 | Silver Inlay - Hand Made Gun |
|
|
| ||||||
| 10258 | Silver Inlay - Hand Made Gun |
|
|
| ||||||
| 10259 | Silver Inlay - Hand Made Gun |
|
|
| ||||||
| 10260 | Silver Inlay - Hand Made Gun |
|
|
| ||||||
| 10261 | Silver Inlay - Hand Made Gun |
|
|
| ||||||
| 10262 | Silver Inlay - Hand Made Gun |
|
|
| ||||||
| 10263 | Silver Inlay - Hand Made Gun |
|
|
| ||||||
| 10264 | Silver Inlay - Hand Made Gun |
|
|
| ||||||
| 10265 | Silver Inlay - Hand Made Gun |
|
|
| ||||||
| 10266 | Silver Inlay - Hand Made Gun |
|
|
| ||||||
| 10267 | Silver Inlay - Hand Made Gun |
|
|
|
