1 - 25 of 71 results
Refine Your Search
| Item | Title | Type | Subject | Creator | Publisher | Date | Place | Address | Description | |
|---|---|---|---|---|---|---|---|---|---|---|
| 3045 | El Placita - Schooner Steam Yacht |
|
| El Placita was built for Abbott - John William Abbott (1834-1897) El Placita was owned at various times by: Abbott - John William Abbott (1834-1897) McCormick - Robert Hall McCormick Jr. (1878-1963) Jesup - Morris Ketchum Jesup (1830-1908) | 
Description: El Placita was built for Abbott - John William Abbott (1834-1897) El Placita was owned at various times by: Abbott - John William Abbott (1834-1897) McCormick - Robert Hall McCormick Jr. (1878-1963) Jesup - Morris Ketchum Jesup (1830-1908) | |||||
| 3466 | George E. Klinck - Schooner |
|
| George E. Klinck was a three masted schooner built at the Michael B. McDonald Shipyard in Mystic, Connecticut in 1904. She was a 152.6' centerboarder weighing 560 gross tons. "George E. Klinck" was a three masted [152.6' centerboarder, 560 gross tons] schooner built at [the Michael B. McDonald Shipyard in] Mystic, Connecticut in 1904. Lennox Ledyard "Bink" Sargent (1916-1989) [and Jay Bushway of Marblehead] acquired her circa 1937 when he found her laid up in Rockland. He brought her up to the coal dock on Clark Point in Southwest Harbor and restored her. They worked on her from a float in the water and replaced her transom, among other things. Ralph Merrill Grindle (1915-2005) spliced her rigging. [Ralph Merrill Grindle was later a partner with Roger C. Rich in the Rich & Grindle boat shop where he specialized in rigging.] Captain Lewis McFarland of Trenton took her down to Camden and from there she went south to pick up a load of hard pine. On her return north she took a pounding and a beating around Cape Hatteras in North Carolina and broke up. Her crew was rescued by the aircraft carrier "Wasp." - Ralph Warren Stanley 10/26/10 "George E. Klinck" had been in difficulties before "Bink" brought her back to life. “On April 15th, 1915 two three-masted vessels, the "George E. Klinck," bound from Long Cove, Me., for New York, with a cargo of stone, and the "Roger Drury," bound from St. John, N. B., for City Island and, with a cargo of laths, struck on Hawes shoal, in Nantucket sound, during heavy weather in the night, the latter being ashore only a short distance outside of Cape Poge. The crew from Muskeget station boarded both vessels early in the morning and later the coast guard cutter “Acushnet” came down and succeeded in floating the "Klinck." The "Drury" remained fast until the 17th, when a wrecking outfit from New London succeeded in floating her, after lightering several hundred bundles of laths.” – “Wrecks Around Nantucket Since The Settlement Of The Island, And The Incidents Connected Therewith, Embracing Over Seven Hundred Vessels” compiled by Arthur H. Gardner, published by the [Nantucket] Inquirer and Mirror Press, c. 1915 - First published in 1877 under the title: “A List Of The Wrecks Around Nantucket” This is the rescue Ralph Stanley describes: “During “USS Wasp’s” passage to Norfolk [Virginia] in 1941, heavy weather sprang up on the evening of 7 March. “Wasp” was steaming at standard speed, 17 knots. Off Cape Hatteras, a lookout spotted a red flare at 2245, then a second set of flares at 2259. At 2329, with the aid of her searchlights, “Wasp” located the stranger in trouble. She was the lumber schooner “George E. Klinck,” bound from Jacksonville, Florida, to Southwest Harbor, Maine. The sea, in the meantime, worsened from a state 5 to a state 7. “Wasp” lay to, maneuvering alongside at 0007 on 8 March. At that time, four men from the schooner clambered up a swaying “jacobs ladder” buffeted by gusts of wind. Then, despite the raging tempest, “Wasp” lowered a boat, at 0016, and brought the remaining four men aboard from the foundering 152-foot schooner. Later that day, “Wasp” disembarked her rescued mariners and immediately went into dry-dock at the Norfolk Navy Yard. The ship received vital repairs to her turbines. Port holes on the third deck were welded over to provide better watertight integrity, and steel splinter shielding around her 5-inch and 1.1-inch batteries was added.” - “USS Wasp (CV-7) – Definition”, WordiQ site, 2010, Accessed online 10/16/10; http://www.wordiq.com/definition/USS_Wasp_(CV-7) “A Jacobs ladder is a portable ladder used on ships and having, typically, wooden rungs and rope or wire sides” – YourDictionary.com 10/26/10. The ships plans for "George E. Klinck" are Mystic Seaport in the Daniel S. Gregory Ships Plans Library, Miscellaneous Commercial Sail Collection. See Look Magazine, May 20, 1941 for a contemporary account of the rescue of the crew of "George E. Klinck." See page 93-96 “The Last Sail Downeast” by Giles M.S. Tod, published by Barre Publishers, Barre, Massachusetts, 1965 for more about “George E. Klinck.” | 
Description: George E. Klinck was a three masted schooner built at the Michael B. McDonald Shipyard in Mystic, Connecticut in 1904. She was a 152.6' centerboarder weighing 560 gross tons. "George E. Klinck" was a three masted [152.6' centerboarder, 560 gross tons] schooner built at [the Michael B. McDonald Shipyard in] Mystic, Connecticut in 1904. Lennox Ledyard "Bink" Sargent (1916-1989) [and Jay Bushway of Marblehead] acquired her circa 1937 when he found her laid up in Rockland. He brought her up to the coal dock on Clark Point in Southwest Harbor and restored her. They worked on her from a float in the water and replaced her transom, among other things. Ralph Merrill Grindle (1915-2005) spliced her rigging. [Ralph Merrill Grindle was later a partner with Roger C. Rich in the Rich & Grindle boat shop where he specialized in rigging.] Captain Lewis McFarland of Trenton took her down to Camden and from there she went south to pick up a load of hard pine. On her return north she took a pounding and a beating around Cape Hatteras in North Carolina and broke up. Her crew was rescued by the aircraft carrier "Wasp." - Ralph Warren Stanley 10/26/10 "George E. Klinck" had been in difficulties before "Bink" brought her back to life. “On April 15th, 1915 two three-masted vessels, the "George E. Klinck," bound from Long Cove, Me., for New York, with a cargo of stone, and the "Roger Drury," bound from St. John, N. B., for City Island and, with a cargo of laths, struck on Hawes shoal, in Nantucket sound, during heavy weather in the night, the latter being ashore only a short distance outside of Cape Poge. The crew from Muskeget station boarded both vessels early in the morning and later the coast guard cutter “Acushnet” came down and succeeded in floating the "Klinck." The "Drury" remained fast until the 17th, when a wrecking outfit from New London succeeded in floating her, after lightering several hundred bundles of laths.” – “Wrecks Around Nantucket Since The Settlement Of The Island, And The Incidents Connected Therewith, Embracing Over Seven Hundred Vessels” compiled by Arthur H. Gardner, published by the [Nantucket] Inquirer and Mirror Press, c. 1915 - First published in 1877 under the title: “A List Of The Wrecks Around Nantucket” This is the rescue Ralph Stanley describes: “During “USS Wasp’s” passage to Norfolk [Virginia] in 1941, heavy weather sprang up on the evening of 7 March. “Wasp” was steaming at standard speed, 17 knots. Off Cape Hatteras, a lookout spotted a red flare at 2245, then a second set of flares at 2259. At 2329, with the aid of her searchlights, “Wasp” located the stranger in trouble. She was the lumber schooner “George E. Klinck,” bound from Jacksonville, Florida, to Southwest Harbor, Maine. The sea, in the meantime, worsened from a state 5 to a state 7. “Wasp” lay to, maneuvering alongside at 0007 on 8 March. At that time, four men from the schooner clambered up a swaying “jacobs ladder” buffeted by gusts of wind. Then, despite the raging tempest, “Wasp” lowered a boat, at 0016, and brought the remaining four men aboard from the foundering 152-foot schooner. Later that day, “Wasp” disembarked her rescued mariners and immediately went into dry-dock at the Norfolk Navy Yard. The ship received vital repairs to her turbines. Port holes on the third deck were welded over to provide better watertight integrity, and steel splinter shielding around her 5-inch and 1.1-inch batteries was added.” - “USS Wasp (CV-7) – Definition”, WordiQ site, 2010, Accessed online 10/16/10; http://www.wordiq.com/definition/USS_Wasp_(CV-7) “A Jacobs ladder is a portable ladder used on ships and having, typically, wooden rungs and rope or wire sides” – YourDictionary.com 10/26/10. The ships plans for "George E. Klinck" are Mystic Seaport in the Daniel S. Gregory Ships Plans Library, Miscellaneous Commercial Sail Collection. See Look Magazine, May 20, 1941 for a contemporary account of the rescue of the crew of "George E. Klinck." See page 93-96 “The Last Sail Downeast” by Giles M.S. Tod, published by Barre Publishers, Barre, Massachusetts, 1965 for more about “George E. Klinck.” [show more] | |||||
| 3542 | Arthur B. Homer - Great Lakes Steam Freighter |
|
| |||||||
| 3616 | William Keene - Schooner |
|
| |||||||
| 3648 | Frederick J. Lovatt - Schooner |
|
| |||||||
| 3649 | Ligure - Schooner |
|
| The Schooner Ligure was built in 1853 at Mt. Desert. It wrecked on March 29, 1879 on the Nantucket Shoals. James Granville Thurston, brother of Captain John B. Thurston, perished in the wreck. The crew included: Captain John Benjamin Thurston (1848 - Jan. 22, 1936) James Granville Thurston (Dec. 7, 1845 - March 29, 1879) Charles Benjamin Mitchell (1857-1927) Daniel G. Benson (1858-1931) Charles Leon Lawson (Jan. 1, 1863-1943) "Ligure" means precious stone | 
Description: The Schooner Ligure was built in 1853 at Mt. Desert. It wrecked on March 29, 1879 on the Nantucket Shoals. James Granville Thurston, brother of Captain John B. Thurston, perished in the wreck. The crew included: Captain John Benjamin Thurston (1848 - Jan. 22, 1936) James Granville Thurston (Dec. 7, 1845 - March 29, 1879) Charles Benjamin Mitchell (1857-1927) Daniel G. Benson (1858-1931) Charles Leon Lawson (Jan. 1, 1863-1943) "Ligure" means precious stone [show more] | |||||
| 3679 | Leader - Schooner |
|
| Maypole Point is on the right. The schooner, "Leader" is center rear with a pinky (double-ender) to the right of her. The sloop in the left foreground is rigged like the Irish/Boston hookers, a type of vessel not native to Mount Desert Island. There is a weir visible to the right rear of the photograph. |
Description: Maypole Point is on the right. The schooner, "Leader" is center rear with a pinky (double-ender) to the right of her. The sloop in the left foreground is rigged like the Irish/Boston hookers, a type of vessel not native to Mount Desert Island. There is a weir visible to the right rear of the photograph. | |||||
| 3696 | Alice M. Leland - Schooner |
|
| |||||||
| 3698 | Abby K. Bentley - Coasting Schooner Emma R. Harvey - Coasting Schooner |
|
| Coasting Schooner "Abby K. Bentley" , later "Emma R. Harvey" carried lumber, cement etc. As Schooner "Emma R. Harvey" she was lost off Digby Gut on the 5th December 1906. Her owner/captain, John Walter Berry, died later as a result of having lashed himself to her wheel in the freezing storm. The Digby Gut or St. George's Strait as it is officially named, is a narrow channel connecting the Bay of Fundy with the Annapolis Basin. The town of Digby, Nova Scotia is located on the inner portion of the western side of the Gut. |  Abby K. Bentley - Coasting Schooner Emma R. Harvey - Coasting Schooner
Description: Coasting Schooner "Abby K. Bentley" , later "Emma R. Harvey" carried lumber, cement etc. As Schooner "Emma R. Harvey" she was lost off Digby Gut on the 5th December 1906. Her owner/captain, John Walter Berry, died later as a result of having lashed himself to her wheel in the freezing storm. The Digby Gut or St. George's Strait as it is officially named, is a narrow channel connecting the Bay of Fundy with the Annapolis Basin. The town of Digby, Nova Scotia is located on the inner portion of the western side of the Gut. [show more] | |||||
| 3700 | Pendleton Sisters - Schooner |
|
| |||||||
| 3701 | Yampa - Schooner Yacht |
|
| The 132 foot steel yacht Yampa was built in 1887 for Chester W. Chapin. | 
Description: The 132 foot steel yacht Yampa was built in 1887 for Chester W. Chapin. | |||||
| 12911 | Frances Parsons - Schooner |
|
| |||||||
| 13057 | E. T. Hamor - Schooner |
|
| |||||||
| 13058 | Federal of Mt. Desert - Schooner |
|
| |||||||
| 13059 | Kate L. Pray - Schooner |
|
| |||||||
| 13135 | Levi Woodbury - U.S. Revenue Cutter |
|
| Vessel Name – Mahoning – renamed Levi Woodbury “Woodbury” April 1898 – renamed Laksco after 1915 Class – Topsail Schooner / Steamer – Pawtuxet-class tender Hull – wood – oak, locust and white oak w. iron diagonal bracing Masts - 2 Rig – topsail schooner Build date – 1863 Commissioned – July 18, 1864 Built by – J.W. Lynn & Sons Built at – Philadelphia, Pennsylvania Built for – U.S. Revenue Service Named for – Mahoning creek and valley, Pennsylvania – 1898 for Levi Woodbury (1789-1851), U.S. Senator, Secretary of the Navy, Supreme Court Justice Power – steam engine with 2 oscillating cylinders; single 8’ screw Displacement – 350 tons Length – 138’ Beam – 26’6” Draft – 11’ Crew – 7 officers, 34 enlisted Armament – 1 x 30-pound Parrott rifle; 5 x 24-pound howitzers Number – Disposition – By 1913, Woodbury was not only the Coast Guard's oldest cutter, she was the oldest active-duty vessel in U.S. government service, as well as being the only ship to have seen active service in both the American Civil War and the Spanish-American War. Decommissioned by Coast Guard, July 19, 1915, Portland, Maine. Sold to Thomas Butler & Co., Boston, Massachusetts August 10, 1915. Woodbury's decommission ended 51 years with the Revenue Cutter Service, making her one of the longest serving cutters in the organization's history. After her final decommission in 1915, Levi Woodbury was placed into service as the merchant Laksco. She disappears from shipping records in 1932. “For more than fifty years the cutter “Levi Woodbury” was stationed on the coast of Maine, ranging between Portland and Eastport with regular calls at Rockland, Castine, and Machiasport. At first her hull was black, but later was painted white. She served from 1864 until 1916, when she was condemned by the government and sold. She finished her days enacting shipwreck scenes in silent movies.” - “Penobscot Bay, Mount Desert and Eastport Steamboat Album” by Allie Ryan, p. 68-69 – 1972 A revenue cutter did customs work, survey work and smuggling patrol. It functioned as the Coast Guard does today. - Ralph Stanley - 09/26/2007 In 1790, Alexander Hamilton proposed armed shipping vessels to enforce customs duties in the nations shipping ports. Congress appropriated $10,000 to maintain 10 revenue cutters to be placed under the charge of customs collectors. | 
Description: Vessel Name – Mahoning – renamed Levi Woodbury “Woodbury” April 1898 – renamed Laksco after 1915 Class – Topsail Schooner / Steamer – Pawtuxet-class tender Hull – wood – oak, locust and white oak w. iron diagonal bracing Masts - 2 Rig – topsail schooner Build date – 1863 Commissioned – July 18, 1864 Built by – J.W. Lynn & Sons Built at – Philadelphia, Pennsylvania Built for – U.S. Revenue Service Named for – Mahoning creek and valley, Pennsylvania – 1898 for Levi Woodbury (1789-1851), U.S. Senator, Secretary of the Navy, Supreme Court Justice Power – steam engine with 2 oscillating cylinders; single 8’ screw Displacement – 350 tons Length – 138’ Beam – 26’6” Draft – 11’ Crew – 7 officers, 34 enlisted Armament – 1 x 30-pound Parrott rifle; 5 x 24-pound howitzers Number – Disposition – By 1913, Woodbury was not only the Coast Guard's oldest cutter, she was the oldest active-duty vessel in U.S. government service, as well as being the only ship to have seen active service in both the American Civil War and the Spanish-American War. Decommissioned by Coast Guard, July 19, 1915, Portland, Maine. Sold to Thomas Butler & Co., Boston, Massachusetts August 10, 1915. Woodbury's decommission ended 51 years with the Revenue Cutter Service, making her one of the longest serving cutters in the organization's history. After her final decommission in 1915, Levi Woodbury was placed into service as the merchant Laksco. She disappears from shipping records in 1932. “For more than fifty years the cutter “Levi Woodbury” was stationed on the coast of Maine, ranging between Portland and Eastport with regular calls at Rockland, Castine, and Machiasport. At first her hull was black, but later was painted white. She served from 1864 until 1916, when she was condemned by the government and sold. She finished her days enacting shipwreck scenes in silent movies.” - “Penobscot Bay, Mount Desert and Eastport Steamboat Album” by Allie Ryan, p. 68-69 – 1972 A revenue cutter did customs work, survey work and smuggling patrol. It functioned as the Coast Guard does today. - Ralph Stanley - 09/26/2007 In 1790, Alexander Hamilton proposed armed shipping vessels to enforce customs duties in the nations shipping ports. Congress appropriated $10,000 to maintain 10 revenue cutters to be placed under the charge of customs collectors. [show more] | |||||
| 13152 | Carrie M. Richardson - Coasting Schooner |
|
| 283 tons and 114 feet in length Owned by Meltiah Richardson (1828-1901), named after his wife, Mary Caroline "Carrie" Stanley Richardson (1847-1920) launched in 1874, sold in 1883 Rescued at the Peaked Hill Bar Life Saving Station in 1885 | 
Description: 283 tons and 114 feet in length Owned by Meltiah Richardson (1828-1901), named after his wife, Mary Caroline "Carrie" Stanley Richardson (1847-1920) launched in 1874, sold in 1883 Rescued at the Peaked Hill Bar Life Saving Station in 1885 | |||||
| 13365 | Emma - Mackerel Schooner |
|
| |||||||
| 13366 | Marion E. Turner - Schooner |
|
| |||||||
| 13401 | Niliraga - Schooner |
|
| When "Niliraga" sailed in Mount Desert waters she was owned by the Dunn and Milliken families and sailed off of Sutton Island and Northeast Harbor, Maine. Ralph Warren Stanley sailed her for both families. She was built with a shorter bowsprit and single jib, but she had such a weather helm that Mr. Dunn had the bowsprit lengthened and an extra jib added and original jib made smaller. “That helped her some.” She was sold away and featured in a TV mini-series. "Some guy was 'murdered' on her deck." She ended up in Brewer, Maine, "probably cut up and dumped." - Ralph Stanley 01/28/2013. | 
Description: When "Niliraga" sailed in Mount Desert waters she was owned by the Dunn and Milliken families and sailed off of Sutton Island and Northeast Harbor, Maine. Ralph Warren Stanley sailed her for both families. She was built with a shorter bowsprit and single jib, but she had such a weather helm that Mr. Dunn had the bowsprit lengthened and an extra jib added and original jib made smaller. “That helped her some.” She was sold away and featured in a TV mini-series. "Some guy was 'murdered' on her deck." She ended up in Brewer, Maine, "probably cut up and dumped." - Ralph Stanley 01/28/2013. [show more] | |||||
| 13649 | Salvage III |
|
| “Salvage III” was originally built at 82 tons, 66’ long, 4.5’ draft (light) and 24.5’ wide. Douglas lengthened her using the facilities at the Hinckley yard in Manset at the same time that he built their large self-powered steer able boat trailer in 1993-1994. “Salvage III” was lengthened by 16’ to 82’ and was 102 tons after lengthening. She carries 3 engines - all Detroit Diesels – two 871s and one 671 for operating the hydraulics and the generator. She carries a hydraulic derrick, and, among other things, uses the derrick to drive a “spud” (steel post) through a casing on the corner of the vessel to moor “Salvage III.” Douglas started building “Salvage III” at Southwest Boat Corporation on Clark Point Road, Southwest Harbor, in late October 1989 and launched her in August 1990. “Salvage III” was one of the last vessels built there as Southwest Boat closed in February 1990. | 
Description: “Salvage III” was originally built at 82 tons, 66’ long, 4.5’ draft (light) and 24.5’ wide. Douglas lengthened her using the facilities at the Hinckley yard in Manset at the same time that he built their large self-powered steer able boat trailer in 1993-1994. “Salvage III” was lengthened by 16’ to 82’ and was 102 tons after lengthening. She carries 3 engines - all Detroit Diesels – two 871s and one 671 for operating the hydraulics and the generator. She carries a hydraulic derrick, and, among other things, uses the derrick to drive a “spud” (steel post) through a casing on the corner of the vessel to moor “Salvage III.” Douglas started building “Salvage III” at Southwest Boat Corporation on Clark Point Road, Southwest Harbor, in late October 1989 and launched her in August 1990. “Salvage III” was one of the last vessels built there as Southwest Boat closed in February 1990. [show more] | |||||
| 13651 | Salvage II |
|
| Built by Douglas Beal. His second vessel, “Salvage II” is now owned by Jeff Berzinis at Southwest Boat Marine Services on Clark Point Road, Southwest Harbor. “Salvage II” is now “Triton.” | 
Description: Built by Douglas Beal. His second vessel, “Salvage II” is now owned by Jeff Berzinis at Southwest Boat Marine Services on Clark Point Road, Southwest Harbor. “Salvage II” is now “Triton.” | |||||
| 13661 | Sylvina W. Beal - Fishing Schooner |
|
| |||||||
| 13667 | Aloha I - Brig Rigged Yacht |
|
| |||||||
| 13752 | Palestine - Schooner |
|
|
