Remains of schooner "Catherine" in Fernald Cove, Somesville, 1935. A few years later a storm shifted the hulk to the shore at right where surviving frames and timbers could be seen for some years at low tide. After the wreck and before this photograph was taken, salvagers cut a hole through the side of the vessel to allow the mast to fall into the water and be salvaged. The hole, near the bow. is visible in this photograph. SWHPL 9500 was a duplicate of this item and has been removed.
Description: Remains of schooner "Catherine" in Fernald Cove, Somesville, 1935. A few years later a storm shifted the hulk to the shore at right where surviving frames and timbers could be seen for some years at low tide. After the wreck and before this photograph was taken, salvagers cut a hole through the side of the vessel to allow the mast to fall into the water and be salvaged. The hole, near the bow. is visible in this photograph. SWHPL 9500 was a duplicate of this item and has been removed. [show more]
Description: The Claremont Hotel can be seen in the background on the left of the boat. This photograph was taken from Connor's Point in Southwest Harbor, Maine.
The boathouse just visible over "Lillian's" bowsprit belonged to William Doane Stanley (1855-1932), "Uncle Jimmy." His Chester Clement built passenger launch, "Leader" is on the shore to the right of the boathouse. Jimmy used her to carry summer people in the summer. In the winter he took off the wicker chairs etc. and used her to carry sardines to the factories.
Description: The boathouse just visible over "Lillian's" bowsprit belonged to William Doane Stanley (1855-1932), "Uncle Jimmy." His Chester Clement built passenger launch, "Leader" is on the shore to the right of the boathouse. Jimmy used her to carry summer people in the summer. In the winter he took off the wicker chairs etc. and used her to carry sardines to the factories.
Ralph is shown using a winch head to haul his traps. Robert Crowe had not yet developed the east coast Hydro-Slave pot hauler. He did so in 1964 thereby making it much easier to lift the heavy, water sodden pots from the sea.
Description: Ralph is shown using a winch head to haul his traps. Robert Crowe had not yet developed the east coast Hydro-Slave pot hauler. He did so in 1964 thereby making it much easier to lift the heavy, water sodden pots from the sea.
Built by Henry R. Hinckley Company at the Manset Yard during April - June 1938 Owned by Dexter Lewis This item has construction photos including pouring/laying of the keel and stepping the mast, and sea trial photos.
Description: Built by Henry R. Hinckley Company at the Manset Yard during April - June 1938 Owned by Dexter Lewis This item has construction photos including pouring/laying of the keel and stepping the mast, and sea trial photos.
The photograph shows the use of spliced frames, "split frames." Split frames were sawed on the band saw. "Every boat around here was built that way." They would bend the frames in. "The timber goes down in the gain socket." - Ralph Stanley, March 4, 2013.
Description: The photograph shows the use of spliced frames, "split frames." Split frames were sawed on the band saw. "Every boat around here was built that way." They would bend the frames in. "The timber goes down in the gain socket." - Ralph Stanley, March 4, 2013.